Features

ㆍ One, expandable to two, isolated intelligent Signaling Line

Circuit (SLC) Style 4, 6 or 7.

ㆍ Up to 159 detectors (any mix of ion, photo, thermal, or multi-

sensor) and 159 modules (N.O. manual stations, two-wire

smoke, notification, or relay) per SLC. 318 devices perloop/

636 per FACP or network node.

ㆍ Standard 80-character display, 640-character large display,

or display-less (a node on a network).

ㆍ Network option – 103 nodes supported (NFS-640, NCA

Network Annunciator, or NCS Network Control Station) us-

ing wire or fiber-optic connections.

ㆍ 6.0 amp switch mode power supply with four Class A/B

buiit-in Notification Appliance Circuits (NAC). Sele

System Sensor strobe synchronization.

ㆍ Built-in Alarm, Trouble, and Supervisory relays.

ㆍ Up to 64 output circuits per FACP or network node; cir-

cuits configurable online.

– VeriFire Tools offine program option. Sort Maintenance

Reports by compensation value (dirty detector), peak alarm

value, or address.

ㆍ Autoprogramming and Walk Test reports.

ㆍOptional universal 636-point DACT.

ㆍ 80-character remote annunciators (up to 32).

ㆍ EIA-485 annunciators, including custom graphics.

* Printer interface (80-column and 40-column printers),

ㆍHistory file with 800-event capacity in nonvolatile memory,

plus separate 200-event alarm-only file.

ㆍ Alarm Verification selection point, with tally.

Autoprogramming and Walk Test reports.

ㆍPositive Alarm Sequence (PAS) Presignal.

ㆍ Silence inhibit and Auto Silence timer options.

ㆍMarch time / temporal / California two-stage coding / strobe

synchronization.

ㆍ Field-programmable on panel or on PC, with VeriFire M

Tools program check, compare, simulate.

ㆍ Full QWERTY keypad.

ㆍCharger for up to 90 hours of standby power.

ㆍNon-alarm points for lower priority functions.

* Remote ACK/Signal Silence/System Reset/Dril via moni-

tor modules.

The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series from Honeywell NOTIFIER. Designed specifically for small applications, this device comes with a modular design to minimise installation time, enable faster response times, and simplify maintenance. The panel can be configured with just a few devices

Feature

• Fully field programmable
• Direct connect to NOTIFIER FirstCommand™ Emergency Communications System
• One isolated intelligent Signalling Line Circuit (SLC) Style 4, 6 or 7
• Standard 80-character LCD display
• Built-in Alarm, Trouble, Security, and Supervisory relays

ㆍ Universal mounting plate with an onboard shorting spring tests

wiring continuity before installation

ㆍ No extension ring required

ㆍ Field selectable candela settings on ceiling units:

15, 30, 75, 95, 115, 150, and 177

ㆍAutomatic selection of 12-or 24-volt operation

at 15 and 30 candela

ㆍ Rotary switch simplifies field selection of speaker voltage (25

and 70.7 Vrms) and power settings (14, 14, 1 and 2 watts)

Speakers offer high fidelity and high volume sound output

ㆍ 520 Hz +/- 10% square wave tone capable with compatible FACP

Compatble with System Sensor synchronization protocol

ㆍ Electrical compatibility with existing SpectrAlert and SpectrAlert

Advance products

ㆍ Tamper-resistant construction

ㆍ Updated modern aesthetics

ㆍ Universal mounting plate with an onboard shorting spring tests

wiring continuity before installation

ㆍ No extension ring required

ㆍ Field selectable candela settings on ceiling units:

15, 30, 75, 95, 115, 150, and 177

ㆍAutomatic selection of 12- or 24-volt operation

at 15 and 30 candela

ㆍRotary switch simpifies field selection of speaker voltage (25

and 70.7 Vrms) and power settings (4, 14, 1 and 2 watts)

ㆍ Speakers offer high fidelty and high volume sound outputput

ㆍ 520 Hz +/- 10% square wave tone capable with compatible FACP

ㆍ Compatible with System Sensor synchronization protocol

ㆍ Electrical compatibility with existing SpectrAlert and SpectrAlert

Advance products

ㆍ Tamper-resistant construction

ㆍ Updated modern aesthetics